E-Mail - Nokia N91 User Manual

Allow anon. msgs.—Select whether you want to decline
messages from an anonymous sender.
Receive ads—Define whether you want to receive
multimedia message advertisements.
Receive report—Select whether you want the status of the
sent message to be shown in the log (network service).
Receiving a delivery report of a multimedia message that
has been sent to an e-mail address may not be possible.
Deny report sending—Select whether you want to deny
your device sending delivery reports of received
multimedia messages.
Message validity—Select how long the message center
resends your message if the first attempt fails (network
service). If the recipient cannot be reached within the
validity period, the message is deleted from the
message center.
Tip! You may also obtain the multimedia and
e-mail settings from your service provider in
a configuration message. Contact your service
provider for more information. See 'Data and
settings', p. 57.

E-mail

Press , and select Messag.
E-mail and from the following:
> Options > Settings >
Mailboxes—Select a mailbox to change the following
settings: Connection settings,
settings, and Automatic retrieval.
Mailbox in use— Select which mailbox you want to use
for sending e-mail.
To create a new mailbox, select
in the mailbox main view.
Connection settings
To edit the settings for the e-mail you receive, select
Incoming e-mail and from the following:
User name—Enter your user name, given to you by
your service provider.
Password—Enter your password. If you leave this field
blank, you are prompted for the password when you
try to connect to your remote mailbox.
Incoming mail serv.—Enter the IP address or host name
of the mail server that receives your e-mail.
Access point in use—Select an Internet access point (IAP).
See 'Connection', p. 97.
Mailbox name—Enter a name for the mailbox.
Mailbox type—Defines the e-mail protocol that your
remote mailbox service provider recommends. The options
are POP3 and IMAP4. This setting can be selected only
once and cannot be changed if you have saved or exited
from the mailbox settings. If you use the POP3 protocol,
User settings, Retrieval
Options > New mailbox
63