Create A New Synchronization Profile - Nokia N91 User Manual

Create a new synchronization profile

1 If no profiles have been defined, your device asks if you
want to create a new profile. Select Yes.
To create a new profile in addition to existing ones,
select Options
you want to use the default setting values or copy the
values from an existing profile to be used as the basis
for the new profile.
2 Define the following:
Sync profile name—Write a descriptive name for the
profile.
Applications—Select the applications to synchronize
with this profile,
Scroll to each application and press the joystick to
define its synchronization settings:
• Include in sync—Select
the application.
• In Remote database, enter a correct path to the remote
calendar, address book, or database on the server.
• Select Synchronization
synchronization),
Connection settings—Define the following. Contact
your service provider or system administrator for the
correct values.
• Server version—Select the SyncML version the
synchronization server uses. You must select
to synchronize e-mail.
92
> New sync profile. Choose whether
Contacts and Calendar, for example.
Yes if you want to synchronize
type: Normal (two-way
To server only, or To phone
• Server ID—Enter the server ID for the e-mail server
(shown only if
• Data bearer—Select the connection type: Internet,
or Bluetooth.
• Access point
Internet)—Select an access point to use for the data
connection.
• Host address—The IP address of the host server.
• Port—The server port number (shown only if
bearer is set to Internet).
• User name—Your user ID for the synchronization
server.
• Password—Your password for the synchronization
server.
• Allow sync
the server to start a synchronization.
• Accept all sync
device to ask you before a synchronization initialized
by the server is started.
• Network authentic.
only.
set to Internet)—Select
name and password. Scroll down to view the user
name and password fields.
3 Select Back to save the settings and return to the
main view.
1.2
Server version is set to 1.2).
(shown only if Data bearer
requests—Select Yes if you want to allow
reqs.—Select No if you want your
(shown only if Data bearer
Yes to enter a network user
is set to
Data
is