Answer Or Decline A Call; Call Waiting (Network Service) - Nokia N91 User Manual

2 A short tone is played, and
Say clearly the name or nickname that is saved on
the contact card.
3 The device plays a synthesized voice tag for the recognized
contact in the selected device language, and displays
the name and number. After a timeout of 1.5 seconds,
the device dials the number.
If the recognized contact was not correct, select
Next to view a list of other matches, or
cancel voice dialing.
If several numbers are saved under the name, the device
selects the default number, if it has been set. Otherwise the
device selects the first available number of the following:
Mobile, Mobile (home),
(home), and Tel. (work).

Answer or decline a call

To answer the call, press
To mute the ringing tone when a call comes in, select Silence.
Tip! You can also use the
control to answer and end a call.
If you do not want to answer a call, press
it. The caller hears a line busy tone. If you have activated
the Call forward
34
Speak now is displayed.
Quit
mobile (work), Telephone,
or open the slide cover.
key on the remote
> If busy function to forward calls,
declining an incoming call also forwards the call.
See "Call forwarding," p. 103.
When you decline an incoming call, you can also send
a text message to the caller informing why you cannot
answer the call. Select
You can edit the text before sending it. To set up this
option and write a standard text message, see "Call
settings," p. 96.
to

Call waiting (network service)

You can answer a call while you have another call in
progress if you have activated
Call > Call waiting.
Tel.
Tip! To change the device tones for different
environments and events, for example, when you
want your device to be silent, see "Profiles—Set
tones," p. 29.
To answer the waiting call, press
on hold.
To switch between the two calls, select Swap. Select
Options > Transfer
on hold with an active call and to disconnect yourself from
to decline
the calls. To end the active call, press
slide cover. To end both calls, select
Options > Send text message.
Call waiting in Settings
. The first call is put
to connect an incoming call or a call
. or close the
Options > End all
>
calls.