Specifications; Warranty And Service - HITEC X1 Instruction Manual

Ac/dc input,muiti-chemistru balance charger/discharger

Hide thumbs Also See for X1:

Table of Contents

SPECIFICATIONS

AC Input: 100-240Volt

DC Input: 11-18Volt

Circuit Power: Max. Charge Power 50W

Max. Discharge Power 5W

Charge Current Range: 0.1-6.0A

Discharge Current Range: 0.1-1.0A

Current Drain For Balancing LiPo: 300mA/cell

NiCd/NiMH Battery Cell Count: 1-15Cells

LiPo/LiFe/Lilon Cell Count: 1-6Cells

Pb battery voltage: 2-20V

Net Weight: 433g

Dimensions: 135x112x60.9mm

We guarantee this product to be free of manufacturing and assembly

defects for a period of one year from the time of purchase. The

warranty only applies to material or operational defects which are

present at the time of purchase. During that period we will repair or

replace free of service charge for products deemed defective due to

those causes.

You will be required to produce the proof-of-purchase (invoice or

receipt). This warranty is not valid for any damage or subsequent

damage arising as a result of misuse, modification or as a result of

failure to observe the procedures outlined in this manual.

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Manufactured by

Hitec RCD

www.hitecrcd.com

- 27 -

Table of Contents