Huawei SCharger-7KS-S0 User Manual page 10

1
Opening the Charger
Read the installation precautions before the
installation.
1. Push the rear cover downwards.
2. Separate the charger body from the rear cover.
2
1
2
Securing the Rear Cover
Ensure that the installation surface is solid enough
to hold the charger. It is recommended that the
wall have a bearing capacity of at least 100 kg. Do
not drill holes on the rear cover. Otherwise, the
rear cover may be damaged.
1. Place the rear cover on the wall, keep it horizontal,
and use a marker to mark the hole drilling positions
on the wall.
2. Use a hammer drill to drill holes on the wall at the
marked positions, and place wall plugs into the holes.
(Insertion depth: 50 mm; φ10)
3. Use wall-mounting screws to secure the rear cover to
the wall. (Use an M6 Phillips screwdriver with a torque
of 1.4–1.6 N·m.)
Mounting hole
x 4
8
Level
Recommended:
130–140 cm
above the ground