App Guide; Charger Usage - Huawei SCharger-7KS-S0 User Manual

App Installation
Scan the device's QR code before operating.
Download and install the latest app on your
smartphone.
Follow the instructions on the app to complete
wizard settings and parameter settings.
App Commissioning Guide

Charger Usage

Read the installation precautions before using the product.
Ensure that the charger is not cracked or damaged.
Ensure that there is no liquid or other foreign matter on
the charging connector or inside the charging port of the
vehicle.
The following shows how to start a charging session by
swiping the card. For details about other charging modes,
see the charger app.
If the plug-and-play charging mode is used, you can stop
a charging session from the vehicle, by RFID card swiping,
or on the charger app.
Charging by Card Swiping
1. Open the vehicle's charging port.
2. Take the charging connector,
open the socket cover, and
properly insert the charging
connector into the charger and
vehicle.
3. Place the RFID card in the
swiping area to start a
charging session. Keep the
ring pattern on the card
in the swiping area. If the
indicator fast flashes blue
for three times, the card
swiping is successful.
Stopping Charging
Swipe the RFID card to stop a charging session.
Charging will automatically stop when the battery is full.
If the indicator fast flashes red for three times, scan the
QR code in "About This Document" and refer to
"Troubleshooting."
13
≤100°