Before You Begin - Seagate HAWK 2 ST12400N Installation Manual

Hide thumbs Also See for HAWK 2 ST12400N:

Table of Contents

Hawk 2 Family Installation Guide, Rev. C

The physical design characteristics of the drive(s)

described herein, serve to minimize EMI radiation

when installed in an enclosure that provides reason-

able shielding. As such, the drive(s) are capable of

meeting the Class B limits of the FCC Rules and the

Regulations of the Canadian Department of Communi-

cations.

Note. It is the end users' responsibility to assure that

the drive(s) described herein meet the appropri-

ate EMI requirements of their system. Shielded

I/O cables may be required if the enclosure does

not provide adequate shielding. If I/O cables are

external to the enclosure, shielded cables should

be used, with the shields grounded to the enclo-

sure and to the host controller.

Before you begin

Verify that the system is switched off and discon-

nected from main power before any installation is

attempted.

Protect yourself, the drive, and your valuable pro-

grams and data by reading the following cautions

and warnings.

Table of Contents