Table of Contents
Advertisement
16
Hawk 2 Family Installation Guide, Rev. C
Notes.
[1] Standard Hawk 2 units are factory formatted with
512 data bytes per sector with twelve spare sectors
per cylinder and 2 cylinders at inner tracks re-
served for spares in addition to capacity listed.
[2] Does not Include on-board controller overhead.
[3] Maximum measured at any location on top cover.
[4] For best reliability keep below 35
[5] A droop of up to -10% is permissible for a maximum
of 10 seconds at power up. (abfall van -10% is
erlaubt für 10 Sekunden max).
[6] Measured with an average reading DC ammeter.
Instantaneous +12 V current peaks will exceed
these values.
[7] Can be commanded to operate according to SCSI-
1 protocol.
[8] Standard ST11900 units are factory formatted with
512 data bytes per sector with six spare sectors per
cylinder and 2 cylinders at inner tracks reserved for
spares in addition to capacity listed.
o
o
C (95
F).
Advertisement
Table of Contents
