Hawk 2 Family Installation Guide, Rev. C
33
Drive installation
This section describes the physical mounting of the
drive in the host cabinet and the logical installation as
a system member, which is called drive setup.
Disc drive mounting
Do not touch the connector pins or any PCB compo-
nents without observing static-discharge precautions.
Always handle the drive by the frame only.
The drive may be mounted in any orientation. Drive
models with the "NC" suffix may plug directly into a
permanently mounted connector, in which case there is
only one orientation that is correct. Note the shape of
both Drive and host system connectors and orient drive
to allow it to properly plug in.