Transport, Assembly, Intermediate Storage; Transport; Weights; Dimensions - Uniflex UA 4 Operation Manual

4

Transport, assembly, intermediate storage

4.1

Transport

4.1.1 Weights

Figure 4-1 Pallet
Figure 4-2 Transport lugs
4.2

Dimensions

Transport, dimensions, installation, intermediate storage
The device is delivered to you mounted on a pallet.








Length (mm)
380
Table 4-1 Device dimensions
24 – www.uniflex.de
UNIFLEX-Hydraulik -
The device weighs approx. 65 kg.
The power unit weighs approx. 25 kg.
The device may only be unloaded and trans-
ported using a forklift truck, a lifting carriage or a
crane.
Use the transport lugs if transporting by crane.
Please observe the device's center of mass-
when unloading and transporting it.
The area beneath the suspended load must be
kept clear of persons at all times.
Make sure that the transport routes from the un-
loading place to the installation site are suffi-
ciently wide.
Mark parking spaces and transport routes.
Avoid unnecessary risks by pre-arranging the
method of transport and transport routes.
Width (mm)
390
Height (mm)
500