Safe operation, protection of the environment
2.4.3 For maintenance and repair
Working on the hydraulic system
The device is fitted with a hydraulic power unit including a pump and
motor.
Maintenance and repair work on the hydraulic system may
only be performed by UNIFLEX-HYDRAULIK GmbH specialist staff!
Welding, flame-cutting and grinding work
Welding work
Flame-cutting work and
Grinding work
on and in the device and its vicinity must be approved – there is a fire
risk.
Even if such work has been permitted, the device must be cleaned of
dust and combustible material.
Adequate ventilation must be provided.
16 – www.uniflex.de
UNIFLEX-Hydraulik -