General Information - Dantherm HEX 30 Service Manual

General information

This section gives you the general information about this service manual and about the unit.
Introduction
Part number of this service manual is 061629.
Manual, part no.
The target group for this service manual are the technicians who install and maintain
Target group
the HEX 30 unit as well as the users of the unit.
Copying of this service manual, or part of it, is forbidden without prior written permission
Copyright
from Dantherm Air Handling.
Dantherm Air Handling reserves the right to make changes and improvements to the
Reservations
product and the service manual at any time without prior notice or obligation.
Dantherm Air Handling A/S, Marienlystvej 65, DK-7800 Skive hereby declare that the
EC-Declaration of
units mentioned below:
Conformity
are in conformity with the following directives:
- and are manufactured in conformity with the following harmonized standards:
Skive, 14.01.2009
The unit is designed to last for many years. When the time comes for the unit to be re-
Recycling
cycled, the unit should be recycled according to national rules and procedures to pro-
tect the environment.
352909 HEX 30
98/37/EEC Directive on the safety of machines
73/23/EEC Low Voltage Directive
2004/108/EF EU EMC Directive (December 2004)
94/62/EC Packaging Directive
EN 12100 Machine safety
EN 60 335-1 Low Voltage
EN 60 335-2 Low Voltage
EN 61 000-6-2 Immunity: 2001
EN 61 000-6-3 Emission: 2001
5