Preparing The Graphics Card; Removing The Stock Cooler; Zotac Gaming Geforce Rtx 4090 Amp Extreme Airo - ekwb EK-Quantum Vector2 AMP/Trinity RTX 4090 ABP Set D-RGB User Manual
Gpu water block
Hide thumbs
Also See for EK-Quantum Vector2 AMP/Trinity RTX 4090 ABP Set D-RGB:
- Manual (21 pages) ,
- User manual (21 pages) ,
- User manual (19 pages)
Table of Contents
Advertisement
PREPARING THE GRAPHICS CARD
RETENTION
BRACKET
I/O BRACKET
SCREWS
STOCK COOLER
STEP 1
BACKPLATE
STEP 2
REMOVING THE STOCK COOLER
ZOTAC GAMING GeForce RTX 4090 AMP Extreme AIRO
STEP 1
Using a Philips-head screwdriver, unscrew marked screws to detach
the stock cooler and retention bracket from the GPU PCB. After
removing, carefully unplug all the LEDs and FANs cables.
For this step, you will need:
Phillips Head Screwdriver
STEP 2
From the front side of the GPU PCB, additional two (2) screws must
be unscrewed to remove the I/O Bracket from the GPU PCB. Lastly,
unscrew four (4) backplate screws. Remove the Backplate.
Save the I/O Bracket for later use.
For this step, you will need:
Phillips Head Screwdriver
- 7 -
Advertisement
Table of Contents
Need help?
Do you have a question about the EK-Quantum Vector2 AMP/Trinity RTX 4090 ABP Set D-RGB and is the answer not in the manual?