Waters Andrew+Robot User Manual page 14

[ ANDREW+ ROBOT USER GUIDE ]
Error
Error
Standby
Firmware Update
Locate Me
An error is triggered by any of
the below cases:
• Validation of the workbench
failed
• An error during the
experiment
• A collision happened during
a movement
• Any operation in the
experiment, preparation,
start could not be run
Dead PC. Communication
with the PC is not possible
PC, Waste Domino and Arm
are powered down
Tool stand stand is powered
The Andrew+ Robot firmware
is being updated via OneLab
The Andrew+ Robot is
indicating its position via
sound and visual notification
This action is triggered
through the device page in
OneLab, action "Locate me"
Red
Red horizontal line
Green fast heartbeat
Blinking orange line
Violet blinking
Andrew+ Robot User Manual
Error notification
Error notification
-
-
Locate me
14