Trouble Shooting - Airrex HSC-12L User Manual

TROUBLE SHOOTING

TROUBLE
Power plug correctly connected
Power button "OFF"
NOT
Fuse (supply) blown
WORKING
Breaker on switch board tripped
Ambient temp. too high
(Cooling & Dehumidifier: over 113
(HSC-12L)
Filter blocked with dust
Dust in heat exchanger
POOR
COOLING
Obstacle against inlet side
Ambient temp. too high
(Cooling & Dehumidifier: over 113
(HSC-12L))
rev0
CHECK
℉ ℉
or 104 )
℉ ℉
or 104
REMEDY
Connect plug correctly
Press POWER button to "ON"
Exchange fuse in board
Check load capacity and reset
Use only below Cooling & Dehumidifier 113
℉ (HSC-12L)
or 104
Clean Filter
Clean heat exchanger
Remove and allow 20"(50cm). clearance
Use only below Cooling & Dehumidifier 113
or 104 ℉ (HSC-12L)
℉
℉
17