Required Tools; Let's Get Started - Specialized MOUNTAIN BOX 2 Assembly Manual

REQUIRED TOOLS

1. Torque wrench (0 - 10 Nm)
2. 4 mm hex key/bit (stem)
3. 5 mm hex key/bit (seatpost / stem)
4. 6 mm hex key/bit (wheels/pedals)
5. Flat wrench
6. Side cutters
7. Bicycle floor pump (with gauge)
WHAT'S IN THE SMALL PARTS BOX
1. User Manual (where applicable)
2. Assembly Guide
3. Component manuals
4. Owner's Manual
5. Pedals (optional)
6. High-quality grease
7. High-quality carbon assembly paste (if your bicycle
has carbon components)

LET'S GET STARTED

The assembly of this bicycle is best
completed with the help of another person.
1. Remove any tape and open the top of the box.
2. Using the two handles in the middle of the inner
packaging, lift the bicycle and packaging out of the
outer box. Place the inner packaging upright on the
floor in a clear open space.
3. Locate and remove the small parts box, then remove
all the parts supplied to assemble your bicycle.
2
1 2 3
1
USER MANUAL
ENGLISH
2
ASSEMBLY GUIDE
DROP BAR BICYCLE
ENGLISH
1
3
4 5 6
4
COMPONENT COMPONENT
OWNER'S MANUAL
3 5
7
6 7
2