Product Description; Safety Precautions - identités 811065.N Instruction Manual

Toilet wheelchair with black wheels
Hide thumbs Also See for 811065.N:
Table of Contents

Advertisement

Available languages

Available languages

INSTRUCTIONS MANUAL
IMPORTANT
Read the instructions carefully before using this product and keep them
if necessary.
User: If you are unable to read or understand any warnings, precautions
or instructions, please contact your health care professional or distributor
before using this product or risk and damage may result.
Consult your physician or health care professional before using any
assistive device. He/she will advise and inform you on the most
appropriate use in your case.
Distributor: this instruction manual must be given to the users of
this product.

PRODUCT DESCRIPTION

The Toilet Wheelchair with grey wheels is a medical device. It is a technical
toilet aid for the elderly, people with reduced mobility, disabled, injured or
who can easily lose their balance.
PRODUCT DESCRIPTION

SAFETY PRECAUTIONS

Failure to follow the safety precautions may result in the risk of
serious injury.
Don't exceed the maximum supported weight of 165 kg.
Check all components are secured before use.
Make sure that the product is in good working order.
Visually check the product.
Before each use of the product, the brakes and tyres should
be checked.
Check the stability of the chair before use.
Only use on a level ground.
When stationary, apply the brakes on the castors.
Ensure the brakes are released before the chair is moved again.
Always ensure that the device is stationary and braked applied when
transferring to and from the device. Swing away the legrests before
getting in or out of the device. The user should always remove their
feet from the leg rests before swinging the leg rests away.
Do not lean out of the device.
Be careful of pinch points when rising from or lowering on to the
seat, or when you are removing the potty.
Make sure the potty rests securely on the two rails under the seat.
Check, the castors wear, the castors bearings, the brakes, the leg rest
locking mechanism, the seat and backrest, the arm Pads, the potty
and the lid.
In case of damaged, broken, worn or missing parts, contact the dealer.
NOT-UR- 01 OCTOBRE 2020 (VERSION 1.1)
EN
1. Backrest
2. Armrest
3. Clamping wheel
4. Seat
5. Potty with lid
6. Brake wheel
7. Footrest
MOUNTING & USE
ASSEMBLING THE CHAIR FRAME
Loosen the two knobs (1) on each side
from the toilet chair while turning them
counterclockwise.
Insert the backrest sections (2) in both
frame receivers.
Attach the backrest by tightening the
two knurls (1) by turning clockwise.
ARMRESTS OPERATION
FOOTRESTS INSTALLATION
To put the footrests in place,
insert the 2 tubing holes in the
lugs when the footrest is rotated
outwards.
Then
rotate
footrest as shown in the diagram
to lock it in the use position at the
front of the chair.
To rotate the footrest and retract
it, press the chrome lever while
pushing back the legrest. The
legrest can then be lifted to
be removed.
USE OF BRAKES ON WHEELS
Press the lever located above the wheel
to apply the parking brake (as indicated on
the diagram). To release the lock, press the
protruding tab above the wheel.
USE OF POTTY AND LID
The potty and lid are housed under the plastic seat. To add the potty,
slide under the seat from the back of the chair. Make sure the potty is
well fixed on the two rails fixed below from the seat.
To remove the potty, slide the potty under the seat. Add the lid and
carry the potty safely using the chrome handle.
The armrests can be removed for
a lateral transfer and replaced if
necessary by the user.
To replace the armrests, place the
two ends of the armrest tubing in the
receivers located on the frame.
To remove the armrests, simply lift
the armrests.
the
4

Advertisement

Table of Contents
loading

Table of Contents