Gprs At-Commands - Nokia 7250 Support Manual

5. GPRS AT-COMMANDS

For GPRS there are only a few AT-commands because user can't define the speed or
timeslots.
Set Access Point Name
- Where xxx is your APN, also note that in some devices that semicolon (;) is
needed and in some not
Start GPRS connection
- Please verify the phone number from your GSM operator!
Other settings like DNS, IP address, username and password should be set in the device to
appropriate places. Usually only DNS needs to be set but others are either device or
operator depending (I e Palm Pilots need username to be defined (can be whatever), some
Psion models needs to have IP address set to 0.0.0.0 etc.). For further information on the
GPRS related issues, please contact your GPRS service provider.
AT+CGDCONT=,,"xxx";
ATDT *99#
6/6