Advertisement
Available languages
Available languages
4. Connect communication cable
To allow for unattended UPS shutdown/start up and status monitoring,
connect the communication cable one end to the USB port and the other
to the communication port of your PC. With the monitoring software
installed, you can schedule UPS shutdown/start up and monitor UPS
status through PC.
5. Connect Modem/Phone /Network for surge protection
Connect a single modem/phone line into surge protected "IN" outlet
on the back panel of the UPS unit. Connect from "OUT" out let to the
computer with phone line cable.
6. Turn On/Off the unit
Turn on the UPS unit by pressing the power switch. Turn off the UPS unit
by pressing again the power switch.
4.2 Software installation guide
Install software: For optimal computer system protection, install the UPS
monitoring software from
viewpower.html
to fully manage the UPS.
LCD display indicators
5
UPS Mode
LCD display
UPS Power
on
Standby
Mode
https://www.power-software-download.com/
Description
When UPS is powered
on, it will enter this
mode for few seconds.
In standby mode,
no output power is
available.
9
Advertisement
