Receiving The Product; Inspecting The Product; Scope Of Delivery - Grundfos MAGNA1 Installation And Operating Instructions Manual

2. Receiving the product

2.1 Inspecting the product

Check that the product is in accordance with the order.
Check that the voltage and frequency of the product match
voltage and frequency of the installation site. See section
6.3.1 Nameplate.
Pumps tested with water containing anticorrosive
additives are taped on the inlet and outlet ports to
prevent residual test water from leaking into the
packaging. Remove the tape before installing the
pump.

2.2 Scope of delivery

2.2.1 Plug-connected single-head pump
Plug-connected single-head pump
Fig. 1
The box contains the following items:
• MAGNA1-pump
• insulating shells
• gaskets
• quick guide
• safety instructions
• one ALPHA plug.
2.2.2 Plug-connected twin-head pump
Plug-connected twin-head pump
Fig. 2
The box contains the following items:
• MAGNA1-pump
• gaskets
• quick guide
• safety instructions
• two ALPHA plugs.
2.2.3 Terminal-connected single-head pump
Terminal-connected single-head pump
Fig. 3
The box contains the following items:
• MAGNA1-pump
• insulating shells
• gaskets
• quick guide
• safety instructions
• box with terminal and cable glands.
2.2.4 Terminal-connected twin-head pump
Terminal-connected twin-head pump
Fig. 4
The box contains the following items:
• MAGNA1-pump
• gaskets
• quick guide
• safety instructions
• two boxes with terminal and cable glands.
3