2.3 Lifting the pump
Observe local regulations concerning limits for
manual lifting or handling.
Always lift directly on the pump head or the cooling fins when
handling the pump. See fig. 5.
For large pumps, it may be necessary to use lifting equipment.
Position the lifting straps as illustrated in fig. 5.
Correct lifting of pump
Fig. 5
Do not lift the pump head by the control box, i.e. the
red area of the pump. See fig. 6.
Incorrect lifting of pump
Fig. 6
4
3. Installing the product
3.1 Location
The pump is designed for indoor installation.
3.2 Tools
1
2
3
4
5
6
7
8
Recommended tools
Fig. 7
Pos. Tool
1
Screwdriver, straight slot 0.6 x 3.5 mm
2
Screwdriver, straight slot 1.2 x 8.0 mm
3
Screwdriver, torx bit
4
Screwdriver, torx bit
5
Hexagon key
6
Side cutter
7
Open-end spanner
8
Pipe wrench
0.6 x 3.5
1.2 x 8.0
TX10
TX20
5.0
Size
TX10
TX20
5.0 mm
Depending on DN size
Only used for pumps with
unions