Bluetooth Connection Settings; Sending Data Via Bluetooth Technology - Nokia 6260 User Manual

C o n n e c t i v i t y
Bluetooth connection
settings
• Bluetooth – On/Off.
• My phone's visibility
all – Your phone can be found by
other Bluetooth devices or
Hidden – Your phone cannot be
found by other devices. For
security reasons it is advisable to
use the hidden mode whenever
possible.
• My phone's name
name for your phone.
After you have set the Bluetooth
connection as active and changed
My phone's visibility
all, your phone and this name can be
seen by other Bluetooth device
users.
Sending data via Bluetooth
technology
There can be only one active
Bluetooth connection at a time.
1. Open an application where the
item you wish to send is stored.
For example, to send a photo to
another device, open the Gallery
application.
2. Scroll to the item you want to
send and select
→
Via Bluetooth.
3. The phone starts to search for
devices within range. Devices
using Bluetooth technology that
are within range start to appear
98
– Shown to
– Define a
to Shown to
→
Options Send
Copyright © 2004 Nokia. All rights reserved.
on the display one by one. You
can see a device icon, the device's
name, the device type, or a short
name. Paired devices are shown
with . A paired device is one
where a Bluetooth connection
already exists between your
phone and the other device.
• To interrupt the search, press
Stop. The device list freezes
and you can start to form a
connection to one of the
devices already found.
4. When searching for devices,
some devices may show only the
unique device addresses. To find
out the unique address of your
phone, enter the code *#2820#
in standby mode when the
Bluetooth connection is active.
If you have searched for devices
earlier, a list of the devices that
were found previously is shown
first. To start a new search, select
More devices. If you switch off
the phone, the list of devices is
cleared and the device search
needs to be started again before
sending data.
5. Scroll to the device you want to
connect with and press Select.
The item you are sending is
copied to Outbox and the note
Connecting is shown.