Nokia 6260 User Manual page 83

P e r s o n a l i s i n g y o u r p h o n e
• Callback type – The options are
Use server no./Use other
your service provider for the
correct setting to use.
• Callback number
phone's data phone number
which the dial-back server uses.
Usually, this number is the
data-call phone number of your
phone.
• Use PPP compression
to Yes, this option speeds up data
transfer, if supported by the
remote PPP server. If you have
problems with establishing a
connection, try setting this to No.
Contact your service provider for
guidance.
• Use login script
Yes/No.
• Login script – Insert the login
script.
• Modem initialisation
initialisation string) – Controls
your phone using modem AT
commands. If required, enter
characters specified by your
service provider or Internet
service provider.
GPRS
Go to GPRS.
The GPRS settings affect all access
points using a packet data
connection.
72
no.. Ask
– Key in your
– When set
– The options are
(Modem
Copyright © 2004 Nokia. All rights reserved.
GPRS connection – If you select
When available and you are in a
network that supports packet data,
the phone registers to the GPRS
network and short messages are sent
via GPRS. Also, starting an active
packet data connection, for
example, to send and receive e-mail,
is quicker. If you select
needed, the phone uses a packet
data connection only if you start an
application or action that needs it.
The GPRS connection can be closed
when it is not needed by any
application.
If there is no GPRS coverage and you
have chosen When
phone periodically tries to establish
a packet data connection.
Access point – The access point
name is needed when you want to
use your phone as a packet data
modem to your computer.
Data call
Go to Data call.
The Data call settings affect all
access points that use a GSM data
call.
Online time – If there are no actions
the data call is dropped
automatically after a time-out
period. The options are
in which case you enter a time, or
Unlimited.
When
available, the
User defined,