Date And Time; Security - Nokia 6260 User Manual

Nokia 6260: users guide
Hide thumbs Also See for 6260:
Table of Contents

Advertisement

Date and time

Go to
Date and
The
Date and time
you to define the date and time used
in your phone, as well as change the
date and time format and
separators.
Clock type
Analogue
Digital
– To change the clock
shown in standby mode. See
"Clock" on page 83.
Auto time update
network to update time, date,
and time zone information to
your phone (network service). For
the
Auto time update
take effect, the phone needs to
be restarted. Check any alarms as
these may be affected by
time
update.
Clock alarm tone
tone played when the clock alarm
time is reached.
GMT offset
– To change the time
zone for the clock time.
Daylight-saving
daylight saving time on or off.

Security

Go to Security.
Phone and SIM
You can change the following codes:
lock code, PIN code, and PIN2 code.
These codes can only include the
numbers from 0 to 9.
time.
settings allow
or
– To allow the
setting to
Auto
– To change the
– To turn
Copyright © 2004 Nokia. All rights reserved.
P e r s o n a l i s i n g y o u r p h o n e
Avoid using access codes similar to
emergency numbers, such as 112, to
prevent accidental dialling of the
emergency number.
PIN code request
– When the PIN
code request is active, the code is
requested each time the phone is
switched on. Note that some SIM
cards may not allow the PIN code
request to be deactivated.
PIN code/PIN2 code/Lock code
Open this setting if you want to
change the code.
Autolock period
– You can set an
autolock period, a time-out after
which the phone is automatically
locked and can be used only if the
correct lock code is entered. Key in a
number for the time-out in minutes
or select
None
to turn off the
autolock period.
• To unlock the phone, key in the
lock code.
Lock if SIM changed
you want the phone to prompt for
the lock code when an unknown,
new SIM card is inserted into your
phone. The phone maintains a list of
SIM cards that are recognised as the
owner's cards.
Options in the Fixed dialling
view are: Open, Call,
dialling,
Deact. fixed
contact, Edit, Delete,
Contacts,
Add from
Mark/Unmark, Help, and Exit.
– Select
Yes
if
Activ. fixed
dialling,
New
Add to
Contacts, Find,
73

Advertisement

Table of Contents
loading

Table of Contents