Options During A Call; Call Waiting; Diverting Calls - Nokia 6260 User Manual

C a l l f u n c t i o n s

Options during a call

Many of the options that you can
use during a call are network
services. For availability, contact
your network operator or service
provider.
Press Options during a call for some
of the following options:
Mute/Unmute, Activate
Activate loudsp., or
handsfree (if a compatible
Bluetooth headset is attached), and
the network services
End all calls, Hold/Unhold,
Conference, Private,
participant, Answer,
Swap – Switch between the active
call and the call on hold.
Transfer – Connect an incoming call
or a call on hold with an active call
and to disconnect yourself from both
calls.
Send DTMF – Send DTMF tone
sequences, for example, passwords
or bank account numbers.
Sending DTMF tone sequences
1. Key in the digits with
. Each keystroke generates a
DTMF tone, which is transmitted
while the call is active. Press
repeatedly to produce: *, p
(inserts a pause of approximately
2 seconds before or between
DTMF characters.), and w (if you
use this character, the remaining
sequence is not sent until you
12
handset,
Activate
End active call,
New call,
Drop
Reject and:
-
Copyright © 2004 Nokia. All rights reserved.
press Send again during the call).
Press to produce #.
2. To send the tone, press OK.

Call waiting

If you have activated the Call
waiting service (network service),
you will be notified of a new
incoming call while you have a call
in progress.
1. During a call, press
answer the waiting call. The first
call is put on hold. To switch
between the two calls, press
Swap.
2. To end the active call, press
.

Diverting calls

→
Go to Menu
divert.
When this network service is
activated, you can direct your
incoming calls to another number,
for example, to your voice mailbox
number. For details, contact your
service provider.
• Select one of the divert options,
for example, select
divert voice calls when your
number is busy or when you
reject incoming calls.
to
→
Settings Call
If busy to