Writing Text; Using Traditional Text Input; Using Predictive Text Input - Nokia 6260 User Manual

W r i t i n g t e x t

4. Writing text

You can key in text, for example,
when writing messages, using
traditional or predictive text input.
■ Using traditional text
input
The indicator
top right of the display when you are
writing text using traditional text
input.
• Press a number key (
), repeatedly until the
desired character appears. Note
that there are more characters
available for a number key than
are printed on the key.
• To insert a number, press and
hold the number key.
To switch between letter and
number mode, press and hold
.
• If the next letter is located on the
same key as the present one, wait
until the cursor appears (or press
to end the time-out period),
and then key in the letter.
• To insert a space, press
move the cursor to the next line,
press three times.
• To switch between upper and
lower case, press
20
is shown on the
-
. To
.
Copyright © 2004 Nokia. All rights reserved.
■ Using predictive text
input
You can key in any letter with a
single keypress using predictive text
input. To activate predictive text
input, press and select
Dictionary on. This activates
predictive text input for all editors in
the phone. The
shown at the top of the display.
1. Write the desired word by
pressing the keys
Press each key only once for one
letter. The word changes after
every key press.
2. When you have finished the
word, check that it is correct.
• If the word is correct, you can
confirm it by pressing
by pressing
space. The underlining
disappears and you can begin
to write a new word.
• If the word is not correct, you
have the following options:
• Press
view the matching words
the dictionary has found
one by one.
indicator is
- .
or
to insert a
repeatedly to