Call Settings - Nokia 6260 User Manual

Call settings

Go to Call settings.
Send my caller ID
service)
• Set your phone number to be
displayed (Yes) or hidden (No)
from the person whom you are
calling. Or, the value may be set
by your network operator or
service provider when you make a
subscription.
Call waiting (network service)
• The network notifies you of a new
incoming call while you have a
call in progress. Select
to request the network to
activate call waiting,
request the network to
deactivate call waiting, or
status to check if the function is
active or not.
Automatic redial
• When this setting is activated,
your phone makes a maximum of
ten attempts to connect the call
after an unsuccessful call
attempt. Press
automatic redialling.
Summary after call
• Activate this setting if you want
the phone to briefly display the
approximate duration of the last
call.
(network
Activate
Cancel to
Check
to stop
Copyright © 2004 Nokia. All rights reserved.
P e r s o n a l i s i n g y o u r p h o n e
Speed dialling
• Select On, and the numbers
assigned to the speed-dialling
keys ( -
dialled by pressing and holding
the key. See "Assigning speed
dialling keys" on page 25.
Anykey answer
• Select On, and you can answer an
incoming call by briefly pressing
any key, except
.
Line in use (network service)
• This setting is shown only if the
SIM card supports two subscriber
numbers, that is, two phone lines.
Select which phone line
Line 2) you want to use for
making calls and sending short
messages. Calls on both lines can
be answered irrespective of the
selected line.
Note: You cannot make calls
if you select
not subscribed to this
network service.
To prevent line selection, select
→
change Disable
your SIM card. To change this
setting, you need the PIN2 code.
) can be
, , and
(Line 1 or
Line 2 and have
Line
if supported by
69