Advertisement
3-6
Functions
Power ON
(See note 2.)
(See note 1.)
3 s min.
3 s min.
Publication 700-UM002A-EN-D - July 2001
Settings for Advanced Functions
For details on operations in run mode, refer to page
Note:
1. If the mode is switched to the function setting mode during operation, operation will
continue.
2. Changes made to settings in function setting mode are enabled for the first time when
the mode is changed to run mode. Also, when settings are changed, the timer is reset
(time initialized and output turned OFF).
Set the OFF time range using the
OFF time
range
s
For details, refer to Time Range List , below
Set the ON time range using the
ON time
range
s
For details, refer to Time Range List , below.
Set the timer mode using the
Timer mode
Elapsed
Remaining
time
time
Set the twin timer output mode using the
ON/OFF
start mode
(Repeat
(Repeat
Cycle ON start)
Cycle OFF start)
Set the input signal width using the
Input signal
width
20 ms
1 ms
Set the key protect level using the
Key protect
level
3-4.
keys.
s
s
h
keys.
s
s
h
keys.
keys.
keys.
keys.
s
s
Time Range List
Set Value
Display
0.01 s to 99,99 s (default setting)
0.1 s to 999.9 s
1 s to 9,999 s
0 min 01 s to 99 min 59 s
0.1 min to 999.9 min
1 min to 9,999 min
0 h 01 min to 99 h 59 min
0.1 h to 999.9 h
1 h to 9,999 h
0.001 s to 9.999 s
Advertisement
