Advertisement
Settings for Advanced
Functions
See note 1.
1
Functions
Power ON
For details on operations in run mode, refer to 3-9.
Note:
1. If the mode is switched to the function setting mode during operation,
operation will continue.
2. Changes made to settings in function setting mode are enabled for the
first time when the mode is changed to run mode. Also, when settings
are changed, the timer is reset (time initialized and output turned OFF).
See note 2.
Press the mode button for several seconds to display the Time Range setting
3 s min.
3 s min.
screen.
Set the time range using the
Time range
Set the timer mode using the
Timer mode
Set the output mode using the
Output mode
iA j
Set each digit for the output time using the corresponding
Output time
(If the output time is set to 0.00,
Displayed for modes A, A-1, A-2, A-3, B, and B-1 only.
Input signal
width
i20 ms j
Set the key protect level using the
Key protect
level
keys.
c c
s
s
s
keys.
keys.
iA-1 j
iA-2 j
iA-3 j
ib j
ib-1 j
'
is displayed.)
i1 ms j
Chapter
h
s
id j
iE j iF j iZ j
keys.
Time Range List
Display
Set Value
0.01 s to 99.99 s
(default setting)
0.1 s to 999.9 s
1 s to 9,999 s
keys.
0 min 01 s to 99 min
0.1 min to 999.9 min
1 min to 9,999 min
0 h 01 min to 99 h 59
0.1 h to 999.9 h
1 h to 9,999 h
0.001s to 9.999 s
Publication 700-UM002A-EN-D - July 2001
3
Advertisement
