Advertisement
3-4
Functions
Operation in Run Mode
When Output Mode Is Not Z
When Output Mode Z Is Selected
Publication 700-UM002A-EN-D - July 2001
Set each digit for the set value using the corresponding
Present value
Set value
Set each digit for the ON duty ratio using the corresponding
Present value
(The
keys for the 4th digit cannot be used.)
ON duty ratio
Set each digit for the cycle time using the corresponding
Present value
Cycle time
Present Value and Set Value
These items are displayed when the power is turned ON. The present value is
displayed in the main display and the set value is displayed in the sub-display.
The values displayed will be determined by the settings made for the time
range and the timer mode in function setting mode.
Present Value and ON Duty Ratio (Output Mode = Z)
The present value is displayed in the main display and the ON duty ratio is
displayed in the sub-display. "SET1" lights at the same time.
Set the ON duty ratio used in ON/OFF-duty adjustable Repeat Cycle (Z) as a
percentage.
If a cycle time is set, cyclic control can be performed in ON/OFF-duty
adjustable Repeat Cycle simply by changing the ON duty ratio.
keys.
keys.
keys.
Advertisement
