Set Up The Frequency Manager - Shure GLXD Plus FM Instruction Manual

⑨ Cascade RF B Connec­
tor
⑩ RF B Connectors
⑪ RF A Connectors
⑫ Cascade RF A Connec­
tor
⑬ RF Input Antenna A

Set Up the Frequency Manager

1. Connect each antenna to the antenna A and antenna B outputs on the rear panel.
2. If mounting in equipment rack, use included rackmount hardware to mount as shown.
3. Connect power supply to power outlet and to the power in on the rear panel.
4. Power each receiver by connecting a DC power cable between the frequency manager's power out and the receiver's
power input.
5. Use reverse SMA cables to connect the frequency manager's RF A and RF B ports to each receiver's antenna A and
antenna B inputs.
Note: If mounting antennas remotely, see Remote Antenna Placement.
Connect to second frequency manager's antenna inputs, or connect a sixth receiver.
Note: Do not use other RF outputs to connect to a second frequency manager.
Connect to receiver's antenna B input.
Connect to receiver's antenna A input.
Connect to second frequency manager's antenna inputs, or connect a sixth receiver.
Note: Do not use other RF outputs to connect to a second frequency manager.
Use reverse SMA cables to connect antenna.
Shure Incorporated
4/13