Shure Incorporated Table of Contents Receiver Channel Display GLXD+FM Frequency Manager GLXD4+ and GLXD6+ Receivers Front and Rear Panels Optional Accessories and Replacement Parts Set Up the Frequency Manager Specifications Selecting Frequency Groups IMPORTANT SAFETY INSTRUCTIONS Linking Transmitters and Receivers...
Shure Incorporated GLXD+FM Frequency Manager Front and Rear Panels ① Antenna A Connector Mount antenna and connect to antenna A input on rear panel. ② Power LED Illuminates when unit is on. ③ Power Switch Powers the system on and off.
Shure Incorporated Connect to second frequency manager's antenna inputs, or connect a sixth receiver. ⑨ Cascade RF B Connec Note: Do not use other RF outputs to connect to a second frequency manager. ⑩ RF B Connectors Connect to receiver's antenna B input.
Shure Incorporated Selecting Frequency Groups The frequency manager creates a shared group of frequencies for all receivers to use, and automatically assigns frequencies to each receiver. If interference occurs, the frequency manager assigns new frequencies without audible dropouts. Using a shared group of frequencies for all receivers prevents one receiver from using all of the best frequencies, and it im proves RF reliability.
Shure Incorporated Connect receivers according to the diagram. For example, use the A2 and B2 ports to connect a second receiver, then use the A3 and B3 ports to connect a third receiver. When using 2 frequency managers, the cascade A and cascade B ports on the second frequency manager connect to a sixth receiver.
Shure Incorporated Frequency Manager Port Num Frequency Manager Receiver Channel Display Frequency manager #1 6 (cascade)* Frequency manager #2 6 (cascade)* Frequency manager #3 6 (cascade) *There is no receiver channel display when connecting cascade port to second or third frequency manager.
Shure Incorporated Maximum Receiver Port Input Power 20 dBm (3 cascades) Maximum Total Receiver Port Input Power 22 dBm (3 cascades) Connector Type Reverse SMA (RP-SMA) Impedance 50 Ω Dimensions 19 x 7.47 x 1.73 in. (482.6 x 189.82 x 43.94 mm)
REACH (Registration, Evaluation, Authorization of Chemicals) is the European Union (EU) and the United Kingdom (UK) chemical substances regulatory framework. Information on substances of very high concern contained in Shure products in a concentration above 0.1% weight over weight (w/w) is available upon request.
Shure Incorporated Notice: The FCC regulations provide that changes or modifications not expressly approved by Shure Incorporated could void your authority to operate this equipment. These limits are designed to provide reasonable protection against harmful interference in a nonresidential installation. How ever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful inter ference with radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures: •...
Need help?
Do you have a question about the GLXD Plus FM and is the answer not in the manual?
Questions and answers