Table of Contents
Advertisement
Channel Count
Group
(Number of Re
ceivers)*
Z2: 12 (2.4 GHz
only)
Z3: 12 (2.4
GHz), 16 (5.8
GHz)
A
Z4: 12 (2.4
GHz), 16 (5.8
GHz)
Z5: 12 (2.4
GHz), 15 (5.8
GHz)
Z2: 15 (2.4 GHz
only)
Z3: 15 (2.4
GHz), 16 (5.8
GHz)
B
Z4: 15 (2.4
GHz), 16 (5.8
GHz)
Z5: 15 (2.4
GHz), 16 (5.8
GHz)
*region dependent
Linking Transmitters and Receivers
Important: Before beginning, turn off all receivers and transmitters. Turn on and link each receiver/transmitter pair one at a
time to prevent cross-linking
1.
After selecting a group using the first receiver, turn on the first transmitter. The blue RF LED will flash while the trans
mitter and receiver form a link. When the link has successfully formed, the RF LED will remain illuminated.
2.
Turn on the second transmitter and repeat for each additional receiver/transmitter pair to finish linking.
Connecting Multiple Frequency Managers
Connect 2 frequency managers if using more than 6 receivers, or connect 3 frequency managers if using more than 11 re
ceivers. Use the cascade A and cascade B ports to connect the frequency managers. Frequency managers can be cascaded
up to a maximum of 16 receivers.
1.
Use reverse SMA cables to connect the cascade A and cascade B ports on the first frequency manager to the antenna
A and antenna B ports on the second frequency manager. Repeat this sequence to connect the second frequency man
ager to a third frequency manager.
Latency
Notes
4.6 ms
8 ms
Best group if you experience interference.
Shure Incorporated
6/13
Advertisement
Table of Contents
