Connecting External Antennas; External Am Antenna; External Fm Antenna; Connecting Auxiliary Components - Pioneer XV-EV51 Operating Instructions Manual

02 Connecting up
• The signal ground (H) is designed to
reduce noise that occurs when an
antenna is connected. It is not an
electrical safety ground.

Connecting external antennas

External AM antenna

Use 5–6 meters of vinyl-insulated wire and
set up either indoors or outdoors. Leave the
AM loop antenna connected.
Indoor
antenna
(vinyl-coated
wire)

External FM antenna

Use 75Ω coaxial cable to hook up an external
FM antenna.
75Ω coaxial cable
16
En
Outdoor antenna
AM LOOP
ANTENNA
5–6m (15–18 ft.)
H
FM UNBAL
75 Ω
FM
ANTENNA
ANTENNA
Connecting auxiliary
components
This system has both stereo analog inputs
and outputs. Use these to connect external
components, such as a VCR, MD, CD-R or
DAT recorder.
• Connect the LINE IN jacks on the rear
panel to an auxiliary playback compo-
nent.
These include components such as a VCR,
DAT, or your TV. Connect using RCA pin-plug
stereo cables.
• Connect the LINE OUT jacks on the
rear panel to a recording component.
These include components such as a
cassette deck, VCR, MD recorder, or another
H
recorder with analog inputs. Connect using
RCA pin-plug stereo cables.
• DTS sources cannot be heard through
the LINE OUT jacks.