Tape Deck; Error Messages - Pioneer XV-EV51 Operating Instructions Manual

15 Additional information

Tape deck

Problem
Cannot record.
Sound is muffled or previous
recording is still audible under-
neath the new one.
Sound is unnaturally bright
Music search does not work
Recording made from the LINE
input are distorted or very quiet.

Error Messages

Message
KEY LOCK
CAN'T
96KHZ
88
En
Remedy
• Check that the cassette still has its erase-protect tabs intact, or
that they are covered with self-adhesive tape (page 83).
• The tape heads may be dirty. Clean the tape heads using a
head-cleaning cassette or cleaning kit.
• Check that you're using a Type I (normal) tape. Do not use Type
II (high/CrO2) or Type IV (metal) tapes.
• If the recording was made with Dolby NR switched off, check
that Dolby NR is also switched off during playback.
• If the recording was made with Dolby NR switched on, check
that Dolby NR is also switched on during playback.
• The spaces between songs may be too short for music search
to work.
• Make sure that the tape is playing when using music search—it
will not work if the tape is stopped.
• Set the line attenuator on or off as necessary (page 59).
Desciption
• This message appears when the front panel buttons are
pressed when the child lock feature is active. See Child Lock on
page 71 for more on switching on/off the child lock.
• This message appears when it is not possible to output the test
tone. Make sure the system is not muted, the headphones are
not plugged in, and neither the AUTO or STEREO Surround
mode is selected to output the test tone. See also Setting the
relative volume level of each channel on page 36.
• This message appears when you're recording something to the
tape deck and try to choose a Surround/Advanced Surround
listening mode or try to adjust the bass or treble.
• This message appears when the source sampling rate is 96kHz
and you try to choose a Surround/Advanced Surround listening
mode or try to adjust the bass or treble.