Connecting The Radio Antennas - Pioneer XV-EV51 Operating Instructions Manual

Connecting up
Connecting the radio
antennas
Connecting the supplied antennas will allow
you to listen to both AM and FM radio
broadcasts. If you find that reception quality
is poor, an outdoor antenna should give you
better sound quality—see Connecting
external antennas on the next page for more
on how to do this.
• Before making or changing antenna
connections, make sure that the power
is switched off and the unit discon-
nected from the wall power outlet.
1 Pull off the protective shields of both
AM antenna wires.
2 Push open the tabs, then insert one
wire fully into each terminal.
3 Release the tabs to secure the AM
antenna wires.
4 Fix the AM loop antenna to the
attached stand.
To fix the stand to the antenna, bend in the
direction indicated by the arrow (fig. a) then
clip the loop onto the stand (fig. b).
1
2
3
• If you plan to mount the AM antenna to
a wall or other surface, secure the stand
with screws (fig. c) before clipping the
loop to the stand. Make sure the
reception is clear.
5 Place the AM antenna on a flat
surface and point in the direction giving
the best reception.
Don't let it come into contact with metal
objects and avoid placing near computers,
television sets or other electrical appliances.
6 Connect the FM wire antenna in the
same way as the AM loop antenna.
For best results, extend the FM antenna fully
and fix to a wall or door frame. Don't drape
loosely or leave coiled up.
The supplied FM antenna is a simple means
of receiving FM stations; using a dedicated,
outdoor FM antenna will usually give you
better reception and sound quality. See
Connecting external antennas on the next
page for connection details.
fig. a
6
H H
FM UNBAL
AM LOOP
75 Ω
ANTENNA
4
ANTENNA
fig. b fig. c
02
15
En