The Initial Setup Menu
On Screen Display
• Default setting: On
Initial Settings
Video Output
OSD Language
Language
On Screen Display
Display
Angle Indicator
Options
This sets whether operation displays are
shown on-screen (Play, Resume, Scan and
so on.)
Angle Indicator
• Default setting: On
Initial Settings
Video Output
OSD Language
Language
On Screen Display
Display
Angle Indicator
Options
If you prefer not to see the camera icon on-
screen during multi-angle scenes on DVD
discs, change this setting to Off.
Options
Parental Lock
On
Off
Some DVD-Video discs feature a Parental
Lock level. If your player is set to a lower level
than the disc, the disc won't play. This gives
you some control about what your children
watch on your DVD player.
Some discs also support the Country Code
feature. The player does not play certain
scenes on these discs, depending on the
country code you set.
Before you can set the Parental Lock level or
the Country Code you must register a
password. As the password owner, you can
change the Parental Lock level or Country
Code whenever you like. You can also change
On
Off
the password.
Registering a new password
You must register a password before you can
change the Parental Lock level or enter a
Country Code.
• Default level: Off
• Default password: none
• Default country code: us (2119)
• Not all discs that you may consider
inappropriate for your children use the
Parental Lock feature. These discs will
always play without requiring the
password first.
• If you forget your password, you'll need
to reset the player to its factory settings
(page 81), then register a new password.
14
77
En