02
Connecting up
• The optional iPod cable from Pioneer is
sold separately under the part number
ADE7129. Contact the Pioneer Customer
Support division for more information on
obtaining an optional iPod cable
USB
sold
iPod cable (
separately
)
Connecting a USB device
It is possible to playback files using the USB
interface on the front of this system.
•
Switch the system into standby then
connect your USB device to the USB terminal
on the front panel of this system.
• Remove the panel cover when making
connections to the front panel.
• For instructions on playing the USB device,
see Playing a USB device on page 40.
USB
24
En
VIDEO INPUT
iPod
iPhone
VIDEO
L
AUDIO
R
MENU
VIDEO INPUT
iPod
iPhone
VIDEO
L
AUDIO
R
USB mass
storage device
Connecting the FM antenna
Connect the FM wire antenna as shown below.
To improve reception and sound quality,
connect external antennas (see Connecting
external antennas below).
•
Push the FM antenna plug onto the center
pin of the FM antenna socket.
For best results, extend the FM antenna fully
and fix to a wall or door frame. Don't drape
loosely or leave coiled up.
iPod
Connecting external antennas
To improve FM reception connect an external
FM antenna to the FM UNBAL 75 Ω.
75 Ω coaxial cable
J-shaped plug
(not supplied)