Alarm format SMS
Selecting SMS format for all pins or ticking this box for a specific pin will mean
that on input "Set" (open circuit) and input "Restore" (closed circuit), the
terminal will send the configured SMS text for the set or restore message to the
configured phone number.
6.13.2.1 Phone number
This option lets you enter the phone number to which the SMS message will be sent
6.13.2.2 Set msg and Restore msg
Enter the Set and Restore text messages to be sent. No message is sent for an entry that is blank.
Alarm format SIA
On input "Set" (open circuit) and input "Restore" (closed circuit), the terminal
will send SIA alarm protocol messages for that input.
6.13.3.1 Set msg and Restore msg
Here you can input the "Set" and "Restore" messages in the correct format as defined in SIA format protocol
SIA DC-03-1990.01(R2003.10). The default "Set" and "Restore" event codes are in the table below.
These defaults can be changed and text descriptions to be sent with the SIA alarm code (under SIA level 3
alarm protocols) can be added. If you exceed the maximum number of characters for the combined set and
restore messages supported by the terminal, a warning will be shown.
Text descriptions can be added by adding ^ before and after the text. For example, to add the text "Fire" to
the message SIA code "NFA01", input "NFA01^FIRE^" into the touchscreen.
Pin
no.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Set message
Restore
message
SIA code
SIA code
NFA01
NFR01
NPA02
NPR02
NBA03
NBR03
NOP04
NCL04
NIA05
NIR05
NBB06
NBU06
NBV07
NBR07
NTA08
NTR08
NAT09
NAR09
NFT10
NFJ10
NQA11
NQR11
NYT12
NYR12
NMA13
NMR13
NUA14
NUR14
NUA15
NUR15
NUA16
NUR16
IRIS-4 Technical Reference Manual.docx 12/01/2023
.
SIA event description
Fire alarm zone 1
Panic alarm zone 2
Burglary alarm zone 3
Open/Close zone 4
Equipment fault zone 5
Burglary bypass zone 6
Burglary verified zone 7
Tamper alarm zone 8
AC Power trouble zone 9
Fire trouble zone 10
Emergency alarm zone 11
System battery trouble zone 12
Medical alarm zone 13
Untyped alarm zone 14
Untyped alarm zone 15
Untyped alarm zone 16
page 39
Need help?
Do you have a question about the IRIS-4 and is the answer not in the manual?