PHASE 2 – INSTALL
2.1 REGULAR INSTALL
2.1.1 • Place the retainer lip on the inside of the end
WITH E-FLOOR
2.1.2A • Install the retainer lip to the Ranger E-Floor. Use hardware provided with the
fl oor. See fl oor install guide for details.
TOOLS
Hex Key 5/16"
Drill
Drill Stop Collar
Drill Bit 7/16"
Wrench 1/2"
WITHOUT E-FLOOR
TOOLS
Cordless Impact
3/8" Socket
OPTIONAL
2.1.3 • For 72", 84" and 96" shelving, align and bolt retainer lip to center bar.
For any feedback or suggestions you may have, please contact:
For technical support, contact us at 1-800-565-5321
End Panel
NOTE: Use 5/16" washers and
lock-washers. (Not included)
2.1.2B • Install the retainer lip to any other fl oor.
"You have successfully installed your Retainer Lip.
Thank you for doing business with us. "
View from rear of shelving
HARDWARE USED
3×
#90-204 Hex Bolt
5/16" × 3/4"
#99-114 Wood Inserts
5/16"x13mm
HARDWARE USED
3×
#92-102 Screw HWH tpAB #14x1"
TOOLS
Cordless Impact
7/16" Socket
HARDWARE USED
1X
#94-112 Bolt 1/4"-20x3/4" ZINC
#98-112 Nut 1/4"-20 ZINC
#90-110 Washer 1/4" O.D. 3/4" ZINC
cs@rangerdesign.com
76-U12XX Installation Guide | REV. A | Page 4
Retainer Lip
Floor