Advertisement
QUICK START GUIDE
Phase 1 - Assembly
1.1 Setup............................................................................................................................................... 3
Phase 2 - Installation
2.1 Regular Install.................................................................................................................................
SAFETY INSTRUCTIONS
WARNING
•Before the installation, carefully read the supplied installation guide to avoid possible injuries and dam-
ages resulting from incorrect installation. Always keep the installation guide in an accessible location at
all times for reference during installation.
•Installers must always wear appropriate safety gear during installation. This may include but is not limit-
ed to gloves, steel toed shoes, and safety glasses.
CAUTION
•Follow all vehicle manufacturer instructions before attempting any installation.
•To prevent rust and other damages, do not drill into the factory fl oor panels.
•Before drilling for the tapping inserts, use a drill stop collar to prevent accidental drilling the van met-
al fl oor panel which may result in damage to components underneath, such as wiring harnesses, fuel
tanks and battery modules.
REQUIRED ITEMS
1 PERSON
For technical support, contact us at 1-800-565-5321
Cordless Impact
Tape Measure
3/8" Socket
7/16" Socket
Hex Key 5/16"
Drill
Drill Stop Collar
Drill Bit 7/16"
Wrench 1/2"
76-U12XX Installation Guide | REV. A | Page 2
4
Advertisement
