Safety Regulations; Layout And Items Supplied - EINHELL GC-EC 750 T Original Operating Instructions

Electric pole-operated pruner
Hide thumbs Also See for GC-EC 750 T:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 19
Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.

1. Safety regulations

The corresponding safety information can be
found in the enclosed booklet.
Danger!
Read all safety regulations and instructions.
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock, fi re and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
This appliance is not intended for use by persons
(including children) with reduced physical, sen-
sory or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
Explanation of the symbols on the machine
(Fig. 18):
1. Warning!
2. Protect the equipment from rain and damp.
3. Watch out for falling and catapulting parts.
4. Keep your distance.
5. Read the directions for use before operating
the equipment.
6. Wear protective headgear, goggles and ear
muff s
7. Wear safety gloves.
8. Wear sturdy, non-slip footwear.
9. If the cable is damaged or cut, disconnect the
power plug from the mains immediately.
10. Electric shock can cause fatal injury. When
holding the pole-mounted pruner, keep it well
away from overhead power cables.
11. Direction of the chain movement and teeth
12. Maximum cutting length / chain speed
Anl_GC_EC_750_T_SPK7.indb 19
Anl_GC_EC_750_T_SPK7.indb 19
GB
13. This equipment complies with Protection
Class II (double-insulated)
14. Guaranteed sound power level: 105 dB

2. Layout and items supplied

2.1 Layout (Fig. 1)
1. Mains power cable
2. Grip
3. On/Off switch
4. Carrying strap with safety release
5. Additional handle
6. Fixed tube
7. Connecting piece
8. Telescopic tube lock
9. Telescopic tube
10. Motor housing
11. Tank cover
12. Saw chain
13. Cutter bar
14. Cutter guard
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
Open the packaging and take out the equip-
ment with care.
Remove the packaging material and any
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
Inspect the equipment and accessories for
transport damage.
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
Electric Pole-Operated Pruner
Handle, counterpart, 4 screws
Saw chain
Cutter bar
- 19 -
09.06.2022 10:51:40
09.06.2022 10:51:40

Advertisement

Table of Contents
loading

This manual is also suitable for:

45.012.10

Table of Contents