Proper Use; Technical Data - EINHELL GC-EC 750 T Original Operating Instructions

•
Cutter guard
•
Original operating instructions
•
Safety instructions

3. Proper use

The chainsaw with telescopic handle is designed
for lopping off tree branches. It is not suitable for
extensive sawing work, felling trees or sawing any
materials other than wood.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Mains voltage: ......................... 220-240 V ~ 50 Hz
Power rating: .............................................. 750 W
Cutter bar length: .................................... 200 mm
Max. cutting length: ................................. 180 mm
Chain pitch: .................................. 3/8", 9,525 mm
Chain thickness:.......................... (0,050") 1,3 mm
Sprocket wheel: ................................ 6 teeth, 3/8"
Cutting speed at rated rpm (vu): .................11 m/s
Oil tank capacity: ....................................... 60 cm³
Weight excluding accessories: ...................3,8 kg
Chain: ..................................... Oregon 91PJ033X
Cutter bar: ..........................Oregon 080SDEA041
Protection class:............................................. II/
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN ISO 11680-1.
L sound pressure level ............................. 86 dB
pA
K uncertainty ............................................. 3 dB
pA
L sound power level .......................... 102,6 dB
WA
K uncertainty ........................................ 2,39 dB
WA
L sound power level guaranteed ............ 105 dB
WA
Anl_GC_EC_750_T_SPK7.indb 20 Anl_GC_EC_750_T_SPK7.indb 20
GB
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN ISO
11680-1.
Handle under load
Vibration emission value
Vibration emission value
front handle a = 1,811 m/s²
h.
Vibration emission value
rear handle a = 1,756 m/s²
h.
K uncertainty = 1.5 m/s
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
The stated vibration emission levels and stated
noise emission values can also be used to make
an initial assessment of exposure.
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Limit the operating time!
All stages of the operating cycle must be conside-
red (for example, times in which the electric tools
are switched off and times in which the tool is
switched on but operates without load).
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
- 20 -
2
09.06.2022 10:51:40 09.06.2022 10:51:40