Replacing The Power Cable; Disposal And Recycling - EINHELL GC-EC 750 T Original Operating Instructions

9. Replacing the power cable

Danger!
If the power cable for this equipment is damaged,
it must be replaced by the manufacturer or its
after-sales service or similarly trained personnel
to avoid danger.
10. Cleaning, storage and ordering
of spare parts
Carry out the cleaning and maintenance work be-
fore putting into storage.
10.1 Cleaning
•
Regularly clean the clamping mechanism by
blowing it out with compressed air or cleaning
it with a brush. Do not use tools for cleaning.
•
Keep the handles free of grease so that you
can maintain a firm grip.
•
Clean the equipment as required with a damp
cloth and, if necessary, mild washing up li-
quid.
Danger!
•
Always disconnect the mains plug before
cleaning the chainsaw.
•
Never immerse the unit in water or other li-
quids in order to clean it.
10.2 Storage and transport
•
If you are not going to use the chainsaw for an
extended period of time, remove the chain oil
from the tank. Briefly immerse the saw chain
and the cutter bar into an oil bath and then
wrap them in oil paper.
•
Store the equipment and its accessories out
of children's reach in a dark and dry place at
above freezing temperature. The ideal sto-
rage temperature is between 5 und 30 °C.
•
Always hold the equipment with one hand on
the main handle and the other hand on the
additional handle.
•
Do not carry the equipment by its motor
housing.
•
Secure the equipment against slipping if you
transport it in a vehicle.
•
If possible, use the original packaging for
transporting the equipment.
•
Clean the electric pole-mounted pruner and
carry out its maintenance before you put it
into storage.
•
If you are not going to use the electric pole-
Anl_GC_EC_750_T_SPK7.indb 25 Anl_GC_EC_750_T_SPK7.indb 25
GB
mounted pruner for an extended period of
time, remove the chain oil from the tank.
Briefly immerse the saw chain and the cutter
bar into an oil bath and then wrap them in oil
paper.
•
During storage or transportation, use the
supplied safety guards for the cutter rail/saw
chain.
10.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.Einhell-Service.com
Spare cutter rail Art. No.: 45.001.68
Spare chain Art. No.: 45.001.88

11. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
- 25 -
09.06.2022 10:51:41 09.06.2022 10:51:41