Safety Regulations; Layout And Items Supplied - EINHELL GE-FS 18/53 Li Original Operating Instructions

Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.
Explanation of the symbols on the equipment
(Fig. 18):
1. Warning!
2. Wear safety goggles and head protection!
3. Protect the tool from rain and damp!
4. Read the operating instructions before you
use the tool for the fi rst time!
5. Wear safety gloves!
6. Keep your hands away from the prongs!
7. Keep a safe distance!
8. An electric shock can cause fatal injury!
When holding the tool, keep it well away from
overhead power cables!
9. Guaranteed sound power level

1. Safety regulations

The corresponding safety information can be
found in the enclosed booklet.
Warning!
Read all the safety information, instructions,
illustrations and technical data provided on
or with this power tool. Failure to adhere to the
following instructions may result in electric shock,
fi re and/or serious injury.
Keep all the safety information and instruc-
tions in a safe place for future use.
This appliance is not intended for use by persons
(including children) with reduced physical, sen-
sory or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
Anl_GE_FS_18_53_Li_SPK13.indb 20 Anl_GE_FS_18_53_Li_SPK13.indb 20
GB

2. Layout and items supplied

2.1 Layout (Fig. 1/2)
1. Battery guard handle (3 parts)
1a. Left battery guard handle
1b. Grip for battery guard handle
1c. Right battery guard handle
2. Battery mount
3. On/Off switch
4. Operating handle
5. Speed controller
6. Union nut
7. Shoulder strap
8. Shoulder strap holder
9. Grip surface
10. Base tube
11. Lock nut A
12. Telescopic tube A
13. Lock nut B
14. Telescopic tube B
15. Lock nut
16. Lock release
17. Shaking unit
18. Joint
19. Prongs (8 pcs)
20. Wall bracket
21. Combination screwdriver
22. Socket head screw with washer
23. Assembly screws (3 pcs)
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any pa-
ckaging and/or transportation braces
(if available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
- 20 -
12.04.2023 12:59:29 12.04.2023 12:59:29