Operation - Qualcast QGTP25 Original Instructions Manual

1a. Fuel mixture:
1 Litre (1000ml) petrol: 25cc (25ml) 2-stroke engine oil (40:1 ratio).
Using a funnel and keeping the bottle level, pour the fuel to the line marked PETROL; and
pour engine oil to the line marked OIL. Shake vigorously to mix the two products prior to
pouring into the tank of the grass trimmer.
1b. Filling tank
Clean the surface around the fuel cap to prevent contamination. Loosen the fuel cap slowly.
Rest the cap on a clean surface. Carefully pour fuel into the tank, avoiding spillage. Prior to
replacing the fuel cap, clean and inspect the seal located inside the fuel cap. Immediately
replace the fuel cap and hand tighten. Wipe up any fuel spillage.
NOTE: It is normal for smoke to be emitted from a new engine after first use.
Emptying engine fuel
Only ever empty the tank outdoors or in well-ventilated rooms. Make sure not to spill fuel or
chain oil into the soil (environmental protection). Use a proper base.
Hold a collection container beneath the fuel drain bolt.
Unscrew the tank cap and remove it.
Allow the fuel to run out completely.
Screw the tank cap firmly by hand.

Operation

When working with the equipment, the appropriate plastic guard hood for 'cutting blade
mode' or 'cutting line mode' must be fitted to prevent objects being thrown out by the
equipment.
The integrated blade in the cutting line guard hood automatically cuts the line to the
optimum length.
14