Operation - Qualcast 1718638 Operating Instructions Manual

positions (See Fig. I).
2). When the handle is in desired position,
H
loosen the button.
13
I

OPERATION

1
INTENDED USE
The machine is intended for cutting weed,
grass or similar soft vegetation in areas that
are hard to reach, e.g. under bushes, on
slopes and edges. It may not be used to
work on unusual thick, dry or wet grass, e.g.
pasture grass, or to shred leaves.
This machine is intended for private domestic
use only, not for any commercial trade use. It
must not be used for any purposes other than
those described.
J
1. OPERATING THE TRIMMER
CAUTION: Always wear eye protection
and heavy clothing to prevent rocks
and debris from hitting you and causing an
eye injury or other serious injuries.
CAUTION: Inspect area to be trimmed
and remove any wire, cord, or string-
like objects which could become entangled
in the rotating line or spool. Be particularly
careful to avoid any wire, which might be
bent outwardly into the path of the tool, such
as barbs at the base of a chain link fence.
1) Your grass trimmer provided one lock-off
K1
switch for prevent accidental starting.
Depress the lock-off button (1) hold it
in position, then fully depress the on/
off switch (2) and hold it in position, the
lock-off button(1) can be released now.
To switch off, just release the on/off switch.
(See Fig J)
250W
Electric Grass Trimmer
ORIGINAL INSTRUCTIONS
2
20
o
WARNING: Allow 5 seconds or more for
H
the grass trimmer to stop rotating after
releasing the ON/OFF switch. DO NOT invert
the grass trimmer or place hands under the
guard until the grass trimmer has come to a
complete stop.
2) Let the trimmer run for a few seconds
without touching the working area, and
allow the trimmer to cut the line after
lengthening.
3) Use the trimmer at an angle of
13
approximately 20-degree to the working
area (see Fig K1).
4) Slowly swing the trimmer from side to side
(see Fig K2).
I
1
J
K1
HELPLINE NO 03448010979
2
20
o