Product Certification - WaterLogic WL7 FIREWALL User Manual

• Waterlogic machines produce hot water
(model dependent) above 52°C, which
can cause severe burns or scalding.
Keep unauthorised people and children
away from the unit to avoid accidental
dispensing of hot water.
• Always use a dedicated and properly
earthed outlet. Unit should be protected
by residual current device (RCD) having
a rated residual operating current not
exceeding 30 mA.
END OF LIFE:
• WEEE (EU Only): please be aware that our products are covered by the Waste Electrical and
Electronic (WEEE) directive (2002/96/EC). The symbol shown denotes that the product should
not be disposed of with general/household waste.
• Disposal Non EU Countries: at the end of this product's life, please ensure that it is disposed
of in an environmentally friendly manner which is in line with your country requirements/
guidelines.
• Please contact your supplier who will arrange for the collection and disposal of this product.

3. PRODUCT CERTIFICATION

Our Waterlogic products are tested and certified to the highest standards by recognised
water associations worldwide.
Waterlogic® International Limited and WLI Trading Limited reserve the right, in order
to reflect continuous research and development, to amend or change specifications
without prior notice.
Waterlogic® and the Waterlogic® logo, Firewall™ and the Firewall™ logo are trademarks
in countries where the Group operates.
WLI Trading Ltd licensed to use BioCote®, and BioCote® logo which are registered
trademarks of BioCote® Ltd.
5
PRODUCT CERTIFICATION
• Use only Waterlogic supplied power
cord and never use extension cords or
power strips to connect the unit. Do not
use if the supply cord is damaged, it
must be replaced by the service agent
or a similarly qualified person in order
to avoid a hazard. Do not remove any
panels or covers to avoid any risk of
electrical shock.
ENG2152-22/05/19