Protection Function; Over Temperature Protection - Godox TT600S User Manual

bL Backlight
Setting
OS Optic Slave
Mode

Protection Function

Over-Temperature Protection
To avoid overheating and deteriorating the flash head, do not fire more than 30
•
continuous flashes in fast succession at 1/1 full power. After 30 continuous
flashes, allow a rest time at least 10 minutes.
If you fire more than 30 continuous flashes and then fire mode flashes in short
•
intervals, the inner over-temperature protection function may be activated and
make the recycling time about 10 to 15 seconds. If this occurs, allow a rest time of
about 10 minutes, and the flash unit will then return to normal.
When the over-temperature protection is started,
•
display.
Number of flashes that will activate over-temperature protection:
Power Output Level
1/1
1/2 + 0.7
1/2 + 0.3
1/2
1/4 (+0.3, +0.7)
1/8 (+0.3, +0.7)
1/16 (+0.3, +0.7)
1/32 (+0.3, +0.7)
1/64 (+0.3, +0.7)
1/128 (+0.3, +0.7)
Backlight can be set
as follows:
<ON> : Always
lighting <12> : Off in
12 sec.
<OF> : Off
<OF> Off
<S1> S1 mode
<S2> S2 mode
Number of Flashes
30
40
50
60
100
200
300
500
1000
19
2. Press <SET> button to enter bp
states.
3. Turn the Select Dial
< > to adjust.
4. Press < > button to return.
1. Press < > button to enter Custom
Functions.
2. Press <SET> button to enter bL
states.
3. Turn the Select Dial
< > to adjust.
4. Press < > button to return.
1. Press < > button to enter Custom
Functions.
2. Press <SET> button to enter OS
states.
3. Turn the Select Dial
< > to adjust.
4. Press < > button to return.
is shown on the LCD