Related Manuals for Zimmer DKPS1000 Series
Summary of Contents for Zimmer DKPS1000 Series
- Page 1 INSTALLATION AND OPERATING INSTRUCTIONS Rotary clamping element, pneumatic DKPS1000 series DDOC01621 THE KNOW-HOW FACTORY www.zimmer-group.com...
-
Page 3: Table Of Contents
11 Commissioning ..................................17 11.1 Checking operational readiness .......................................17 12 Maintenance ....................................18 13 Decommissioning/disposal ..............................18 14 Declaration of Conformity ................................. 19 Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... -
Page 4: Supporting Documents
General notices contain usage tips and valuable information, but no warnings of dangers to health. INFORMATION This category contains useful tips for handling the product efficiently. Failure to observe these tips will not result in damage to the product. This information does not include any information relevant to health or workplace safety. Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... -
Page 5: Safety Notices
► When using the product under extreme conditions, adjust the maintenance interval according to the degree of contamination. ► Avoid using the product with missing or loosened mounting screws. Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... -
Page 6: Proper Use
► Do not remove the laser engraving on the product. ► Do not modify the laser engraving on the product. Ö Zimmer GmbH shall accept no liability for possible damage or complaints about a product with a modified or removed laser engraving. Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... -
Page 7: Functional Description
• The maximum holding torque can also be used for applications for which angle accuracy is not required. Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... -
Page 8: Accessories/Scope Of Delivery
8 Accessories/scope of delivery INFORMATION If any accessories not sold or authorized by Zimmer GmbH are used, the function of the product cannot be guaranteed. Zimmer GmbH accessories are specifically tailored to the individual products. ► For optional accessories and those included in the scope of delivery, refer to our website. -
Page 9: Installation
► Check the machine for any residual energy that may be present. NOTICE ► Installation may only be carried out by qualified personnel in accordance with these installation and operating instructions. ► Switch off the power supply before any assembly, installation or maintenance work. ► Make sure that the mounting piece is sufficiently rigid. Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... -
Page 10: Installing The Product
The holding torque can decrease. ► Maintain the maximum permitted operating pressure. ► Use a pressure relief valve. Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... - Page 11 ► Use a quick exhaust valve at a distance of < 1000 mm to the product in order to achieve the closing times specified in the technical data sheet. Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com...
-
Page 12: Installing The Product With Energy Supply From Above
► De-aerate the product completely. Ö The product centers itself to the shaft. ► Tighten the mounting screws crosswise. Mounting screw Shaft Mounting piece Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... -
Page 13: Installing The Product With Energy Supply From Below
► Insert the bottom grub screw into the connection from above. ► Turn the grub screw until it reaches the bottom housing half. Bottom grub screw Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... - Page 14 ► De-aerate the product completely. Ö The product centers itself to the shaft. ► Tighten the mounting screws crosswise. Mounting screw Shaft Mounting piece Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com...
- Page 15 ► Insert the top grub screw into the connection from above. ► Loosely screw in grub screw until the surface of the product and the grub screw are flush. Bottom grub screw Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com...
-
Page 16: Installing The Sensors
Before installing an accessory, make sure it is suitable for use with the selected variant. ► You can find information on our website. ► Please contact Zimmer Customer Service if you have any questions. Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... -
Page 17: Commissioning
► Check the clamping process by attempting to move the product when power is connected. ► Check that the product moves easily in a deenergized state by moving it manually. Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... -
Page 18: Maintenance
► Dispose of the components properly according to the material groups. ► Comply with the locally applicable environmental and disposal regulations. Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... -
Page 19: Declaration Of Conformity
A full list of applied standards can be obtained from the manufacturer. Michael Hemler Rheinau, Germany, 2022-06-28 Authorized representative for the (Place and date of issuance) Martin Zimmer compilation of relevant technical (Legally binding signature) documents Managing Partner Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com...
Need help?
Do you have a question about the DKPS1000 Series and is the answer not in the manual?
Questions and answers